Palfinger 200010121, Manual

Page: 44 / 435

41
Establishing electrical connections

Select a suitable place for mounting the socket under the vehicle
loading bay. A fixing option is provided on most control panel
holders.

Mount the socket.

Connect the cable from the manual cable switch in the terminal
box in accordance with the
PALFINGER Tail Lifts wiring
diagram.

Find a suitable and secure storage location for the manual cable
switch. Operation of the manual cable switch only permissible
from the marked position on the platform.
Wireless remote
control
The receiver for a wireless remote control is prewired and only has
to be clipped onto to slot J31 on the circuit board and connected
to ground. You will then have to attach the receiver to the stand
tube. The receiver and the wireless remote control are preadjusted
so that they are immediately operational. A detailed description
is supplied with the wireless remote control.
Lead Pin Leads manual cable switch
with 3 buttons with 2 buttons
1 4 white -
2 5 green -
3 6 brown yellow
4 3 yellow red
ye/gn 2 red green/black
Table: 3 Socket connection
NOTE
If the manual cable switch is on the attachment, this is not supplied with a socket but
is connected via a junction box with the wire from the circuit board. The manual
cable switch is then fixed and cannot be unplugged. The required circuit diagram
is available on request from
PALFINGER Tail Lifts .