manualshive.com logo in svg

Palfinger 200010121, Manual

The Palfinger 200010121 is a versatile hydraulic manual designed to assist users in understanding the operating procedures and maintenance requirements of the product. Experience hassle-free handling and efficient operations with our comprehensive, user-friendly manual available for free download at manualshive.com.

Share
Download
background image

78

Folding In and Retracting the Platform

Protect your hands with gloves.

Grasp the platform edge with both hands to fold back the 
platform.

Pull the folding part of the platform with both hands to fold it 
back.

Close the platform interlock (if present).

Swivel the platform up to the roller at the support tube.

Turn the rotary switches

(27)

 and

(29)

 simultaneously up-

ward and hold them in this position until the platform has 
reached the retraction height.

Turn the rotary switch

(30)

 upward and hold it in this posi-

tion until the platform is completely retracted. Observe that 
the platform can be retracted without obstruction.

Turn the rotary switches

(27)

 and

(29)

 simultaneously upward 

and hold them in this position until the platform has reached the 
vibration safeguard.

Summary of Contents for 200010121




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 200010121

IBM 1710 Manual preview
1710
Brand: IBM Pages: 72
ZETRON MAX Connection Manual preview
MAX
Brand: ZETRON Pages: 3
Daktronics RC-100 Operation Manual preview
RC-100
Brand: Daktronics Pages: 52
Simplex F18804 Installation Instructions Operating Instructions preview
F18804
Brand: Simplex Pages: 40
Walter WWS-120B2-K01 Operating Manual preview
WWS-120B2-K01
Brand: Walter Pages: 132
Kaliburn Spirit200a User Manual preview
Spirit200a
Brand: Kaliburn Pages: 164
PAW CoolBloC C34 DN 32 Installation And Operation Instructions Manual preview
CoolBloC C34 DN 32
Brand: PAW Pages: 24
Grainfather Connect Control Box Instructions Manual preview
Connect Control Box
Brand: Grainfather Pages: 9
Hailo TOPlift L+ Operating Instructions Manual preview
TOPlift L+
Brand: Hailo Pages: 104
iWeld POCKETMIG 205 DSC Manual preview
POCKETMIG 205 DSC
Brand: iWeld Pages: 36
TERSO TS032 Manual preview
TS032
Brand: TERSO Pages: 15
Omron DST1 Series Operation Manual preview
DST1 Series
Brand: Omron Pages: 114
ascon Q2 IO-MB/DI-16LV User Manual preview
Q2 IO-MB/DI-16LV
Brand: ascon Pages: 3
FEIN Service 9 08 01 012 00 8 Instruction Manual preview
9 08 01 012 00 8
Brand: FEIN Service Pages: 49
Braun FF3248Y-24V Operator'S Installation And Instruction Manual preview
FF3248Y-24V
Brand: Braun Pages: 41
KSF CA 400 GL Manual preview
CA 400 GL
Brand: KSF Pages: 32
SMC Networks ZXP7 11-X1 Series Operation Manual preview
ZXP7 11-X1 Series
Brand: SMC Networks Pages: 32
Panasonic AYEB500 - HARD DISK BOX Installation Manual preview
AYEB500 - HARD DISK BOX
Brand: Panasonic Pages: 12

Brands by name

Popular brands

Load more brands