Palfinger 200010121, Manual

Page: 247 / 435

180
This certificate is comprised of 2 pages and is only valid in its complete form.
Code XL Certificate MBB PALFINGER GmbH LS0108545-Z1-A1_englisch Page 2 of 2
LS0108545Z1-A1
2.4. Tail Lift load capacity 1500 kg to 2500 kg – all pitches
Platform dimensions: Height: 1,200 – 2,800 mm
Width: 1,750 – 2,600 mm
Bearing bolt diameter Ø36 mm
Control arm length: 700 to 1,100 mm
Nominal load: 1,500 kg to 2,500 kg
Platform heights : up to 2,000 mm 16,000 kg 4,800 daN
Platform heights : up to 2,200 mm 14,500 kg 4,350 daN
Platform heights : up to 2,400 mm 13,000 kg 3,900 daN
Platform heights : up to 2,600 mm 11,500 kg 3,450 daN
Platform heights : up to 2,800 mm 10,000 kg 3,000 daN
2.5. Tail Lift load capacity 2000 kg to 3000 kg – all pitches
Platform dimensions: Height: 1,200 – 3,000 mm
Width: 1,750 – 2,600 mm
Bearing bolt diameter Ø40 mm
Control arm length: 800 to 1,100 mm
Nominal load: 2,000 kg to 3,000 kg
Platform heights : up to 2,000 mm 21,000 kg 6,300 daN
Platform heights : up to 2,200 mm 19,000 kg 5,700 daN
Platform heights : up to 2,400 mm 17,000 kg 5,100 daN
Platform heights : up to 2,600 mm 15,000 kg 4,500 daN
Platform heights : up to 2,800 mm 13,000 kg 3,900 daN
Platform heights : up to 3,000 mm 11,000 kg 3,300 daN
The condition of the tail lifts is to be inspected regularly according to VDI 2700.
3. Information on the loading
The tail lifts are in the position to secure loads in the location named under point 4 under maintenance of
the listed equipment named under point 3 under the following loading conditions:
• Sliding-friction value of a least
ȝ
D
= 0.30
• Form-fit loading against driving direction
• Loading with clearance at least tail lifts width less 10 cm
4. Information on load
The tail lifts is assured for the following loads under maintenance of the conditions listed under point
2 and 3, according to the parameters of recognized rules of technology, e.g. acceleration values
according to DIN EN 12195-1, of the VDI directives 2700 following pages and the certificates and
appraisals.
x
General cargo
x
Palletized loading
TÜV NORD Mobilität GmbH & Co. KG
MBB PALFINGER GmbH
Ganderkesee
Hannover, 25.03.2015
Martin Keller Signature of the responsible party
Permissible
load
masses
Demonstrated
max. test forces
(DIN EN 12642)