Palfinger 200010121, Manual

Page: 302 / 435

51
Opening the Platform

Loosen the platform interlock (if present).

Turn the rotary switch (28) downward and hold it in this po-
sition until the platform has reached the horizontal operat-
ing position.
If an optional load safety device is present, the platform is
lowered and then unfolds to the horizontal operating posi-
tion.
Lowering the Platform

Turn the rotary switch (27) upward and hold it in this posi-
tion until the platform is adjusted flush to the ground.
After the platform has touched the ground it tilts and adjusts
to the ground.
Lifting the Platform

Turn the rotary switch (27) upward and hold it in this posi-
tion until the platform has reached the vehicle loading floor
height.
The platform tilts to the horizontal or preset position before
it is lifted.
Closing the Platform

Turn the rotary switch (28) upward and hold it in this posi-
tion until the platform is closed.
If an optional load safety device is present, the platform
closes approximately to 80° and is lowered a small amount.
Finally, it moves to the vertical transport position and is
lifted into the load safety device.

Close the platform interlock (if present).
Retracting the Hydraulic Stabilizer Feet

Turn the rotary switch (30) upward until the stabilizer feet
are completely retracted.