Palfinger 200010121, Manual

Page: 430 / 435

179
This certificate is comprised of 2 pages and is only valid in its complete form.
Code XL Certificate MBB PALFINGER GmbH LS0108545-Z1-A1_englisch Page 1 of 2
LS0108545Z1-A1
Certificate for securing a load with tail lifts
Requirements specification and load prerequisites
1. Information on the tail lifts
Tail lifts
manufacturer:
MBB PALFINGER GmbH
Fockestraße 53
27777 Ganderkesee
Tail lifts type Standard - HLB with 2 tipping and 2 lifting cylinders
with platforms: Aluminum and steel
Control arm length: up to 1,100 mm
The
tail lifts
fulfill the requirements of DIN EN 12642 Code XL.
2. Information on types and equipment for tail lifts
The tail lifts is to secure loads in the location named under point 4 under maintenance of the loading
conditions named under point 3, if the following equipment components are present:
2.1. Tail Lift load capacity 500 kg to 750 kg – all pitches
Platform dimensions: Height: 1,200 – 2,000 mm
Width: 1,750 – 2,600 mm
Bearing bolt diameter Ø25 mm
Control arm length: 600 to 800 mm
Nominal load: 500 kg to 750 kg
Platform heights : up to 2,000 mm 5,000 kg 1,500 daN
2.2. Tail Lift load capacity 500 kg to 1000 kg – support tube ST180 and all pitches
Platform dimensions: Height: 1,200 – 2,000 mm
Width: 1,750 – 2,600 mm
Bearing bolt diameter Ø25 mm
Control arm length: 600 to 800 mm
Nominal load: 500 kg to 1,000 kg
Platform heights : up to 1,600 mm 8,000 kg 2,400 daN
Platform heights : up to 1,800 mm 7,500 kg 2,250 daN
Platform heights : up to 2,000 mm 7,000 kg 2,100 daN
2.3. Tail Lift load capacity 1000 kg to 1500 kg – all pitches
Platform dimensions: Height: 1,200 – 2,600 mm
Width: 1,750 – 2,600 mm
Bearing bolt diameter Ø28 mm
Control arm length: 700 to 900 mm
Nominal load: 1,000 kg to 1,500 kg
Platform heights : up to 2,000 mm 12,000 kg 3,600 daN
Platform heights : up to 2,200 mm 11,000 kg 3,300 daN
Platform heights : up to 2,400 mm 10,000 kg 3,000 daN
Platform heights : up to 2,600 mm 9,000 kg 2,700 daN
Permissible
load
masses
Demonstrated
max. test forces
(DIN EN 12642)