Palfinger 200010121, Manual

Page: 205 / 435

138
Protecting the Main Switch from Corrosion
To protect the main switch with strip fuse against corrosion:

Grease the main switch with contact grease.
Checks
With every tail lift a test data booklet is provided. According to
this test data booklet the following checks must be performed
by a specialist of your contractor repair shop:
• Check after installation, confirming the satisfactory commis-
sioning in writing in the test data booklet.
• Periodic verification which must be performed at least once a
year. The essential scope of checks is described in the test
data booklet. The check must be confirmed in the test data
booklet in writing.
• Extraordinary check after major repairs or structural
changes. The check must be confirmed in the test data book-
let in writing.
Structural changes are only allowed with the consent of the
manufacturer. Any warranties shall become void if modifica-
tions at the tail lift are performed without our consent. The man-
ufacturer shall not be held responsible for damages, accidents,
etc. The same applies for the usage of third-party spare parts,
if their use has not been explicitly approved.
All Models