Palfinger 200010121, Manual

Page: 100 / 435

33
• Ground adjustment
After bringing down the platform it tilts from the operating po-
sition to adjust to the ground level.
The foldable models
M tilt gradually during bringing down the
platform.
• Setting the Platform to its Horizontal Position
Before the platform is raised from the ground it tilts back into
the horizontal operating position that was stored during
opening.
The foldable models
M tilt gradually during lifting to the hori-
zontal operating position.
• Set the platform tilt
The platform can move to the desired operating position with
a higher or lower tilt angle.
Opening/Folding out/Extending the Platform and
Setting the Platform Tilt

Loosen the platform interlock (if present).

Open, fold out or extend the tail lift depending on the model
by means of the lateral operating element, the foot control,
or the hand cable control, as described in chapter “Operat-
ing Elements” from p. 38 in this manual.

Depending on the model, turn the rotary switch to open or
close the platform, as described in chapter “Operating Ele-
ments” from p. 38 in this manual, until the unladen platform
reaches the desired tilt angle.
Bringing Down the Platform
While the platform is brought down it remains in horizontal po-
sition. After the platform has touched the ground it tilts until the
platform edge is flush with the ground.

Lower the platform depending on the model by means of
the lateral operating element, the foot control, or the hand
cable control, as described in chapter “Operating Elements”
from p. 38 in this manual.
The platform is slowly brought down and automatically ad-
justs to the ground.