Palfinger 200010121, Manual

Page: 27 / 435

24
Installing lifting mechanism
7 Installing lifting mechanism
There are two options for mounting the lifting mechanism:
• Installation with installation aids (see chapter 7.1 on page 24)
• Installation with mounted platform (see chapter 7.2 on page 33),
7.1 Installation with installation aids
To assist in the installation of the lifting mechanism of your
PALFINGER Tail Lifts tail lift, you can on request obtain special
installation aids. This installation aids support you in mounting the
lifting mechanism. The following steps are required when installing
with installation aids:
• position and fix the installation aids on the vehicle chassis
(see chapter 7.1.1 on page 24)
• position lifting mechanism under the vehicle (see chapter 7.1.2
on page 25),
• bolt lifting mechanism to installation aids (see chapter 7.1.3
on page 26),
• position the stand tube (see chapter 7.1.4 on page 27),
• fix lifting mechanism with console plates to vehicle chassis
(see chapter 7.1.5 on page 27),
• mount hydraulic unit (see chapter 7.1.6 on page 32),
• remove installation aids (see chapter 7.1.7 on page 32).
7.1.1 Positioning and fixing the installation aids
on the vehicle chassis
CAUTION
Risk of falling equipment!
If you incorrectly position the installation aids or do not fix it correctly, the lifting
mechanism may fall and cause personal injury or material damage.

Make sure that the installation aids are correctly positioned and properly fixed.