75
public address 10.28.108.* (2~254) dynamically assigned by
BRAS for accessing ISP.
The IP address of the PC can be fixed (as in this example) or
assigned through DHCP server of the DSL Router. If it is
assigned by the DHCP server, the DHCP functions of the DSL
Router must be enabled. The IP address of the DHCP address
pool is 192.168.1.* (2~254). The functions are enabled by
default and at the same time, the PC is configured to obtain IP
and DNS addresses dynamically.
Setting Procedure
Step 1
Open the Internet browser and enter
192.168.1.1
in the
address bar to log in to the DSL Router.
Step 2
Choose
Advanced Setup
>
WAN
and click
Add
.
Step 3
In the
ATM PVC Configuration
page, set VPI/VCI to 2/35
and click
Next
.
Step 4
In the
Connection Type
page, select
MAC
Encapsulation
Routing
(MER)
and
set
the
Encapsulation Mode
to
LLC/SNAP-BRIDGING
, and
then click
Next
.
Step 5
In the
WAN IP Settings
page, select
Obtain an IP
address automatically
,
Obtain default gateway
automatically
and
Obtain a DNS server address
automatically
. Then, click
Next
.
Note
: You can manually configure the WAN IP address, default
gateway, and DNS server address.
Step 6
In the
Network Address Translation Settings
page,
enable the NAT and firewall. Keep default settings for
other fields. Then, click
Next
.
Step 7
Confirm the network configuration and ensure that all
settings are consistent with the data provided by your
ISP. Then, click
Save
.
Step 8
Click
Save/Reboot
to apply the changes and reboot
the DSL Router.