170
–
WPA Group Rekey Interval:
specifies the timer the
WPA key must change. If the value is set to 0, there
is no need to change. The change is done
automatically between the server and the client.
–
WPA Encryption:
select TKIP, AES or TKIP + AES.
The AES is default. The TKIP + AES encryption
mode means AP auto adjust to use TKIP or AES
according to wireless clients.
Click
Save/Apply
to save the wireless security options and
make the changes take effect.
Figure 141 Wireless-security (WPA2-PSK authentication)
Mixed
WPA2/WPA-PSK
Authentication:
This
authentication mode means AP auto adjust to use
WPA2-PSK or WPA-PSK according to wireless clients.
–
Network Authentication:
Set the authentication
mode for the selected wireless LAN of SSID to Mixed
WPA2/WPA-PSK.
–
WPA Pre-Shared Key:
Enter the pre-shared key for
WPA. Client stations must use the same key in order
to connect with this device. Check the table below for
instructions when entering the key.
Format
Minimum
characters
Maximum Characters
