132
Figure 116 Adding static routes-configuration
Adding Static Route
Step 1
Enter destination network address.
Step 2
Enter subnet mask.
Step 3
Enable
Use Gateway IP Address
and enter IP
address.
Step 4
Select use interface.
Step 5
Click
Save/Apply
to apply the settings.
Removing Static Route
Select
Remove
in the table, and click
Remove
to apply the
settings.
4.4.6.3 RIP
Background
The routing information protocol (RIP), as it is more commonly
called, is one of the most enduring of all routing protocols. RIP
is also one of the more easily confused protocols because a
variety of RIP-like routing protocols proliferated, some of which
even used the same name! RIP and the myriad RIP-like
protocols were based on the same set of algorithms that use
