107
Figure 85 Adding outgoing IP filtering
Filter Name
: enter the name of outgoing filter rule.
Protocol
: select one from TCP/UDP, TCP, UDP or ICMP
protocols.
Source IP address:
enter an IP address. After you set the
IP address, outgoing packets (protocol selected packets)
are blocked.
Source Subnet Mask
Source Port:
UPD/TCP source port or a range of ports.
Destination IP address:
destination IP (default: null).
Destination Subnet Mask
Destination Port
: UPD/TCP destination port or a range of
ports.
DSCP Mark
The following is an example of configuring the outgoing IP
filtering.
The topology is as follows:
