13
card of the PC via an Ethernet cable.
Step 3
Plug one end of the power adapter to the wall outlet
and connect the other end to the power port of the DSL
router.
The following figure displays the connection of the DSL router,
PC, and telephones.
2.3 Factory Reset Button
The router may be reset to the factory default settings by
pressing the reset button for a few seconds while the device is
powered on. Use a ballpoint or paperclip to gently push down
the reset button. Remember that this wipes out any settings
stored in the flash memory, including user account information
and LAN IP settings. The device settings are restored to the
following factory defaults: the IP address is 192.168.1.1,
subnet mask is 255.255.255.0, user name is admin, and
password is admin.
