172
WPA. Client stations must use the same key in order
to connect with this device. Check the table below for
instructions when entering the key.
Format
Minimum characters
Maximum Characters
ASCII
8
63
Hexadecimal
8
64
–
WPA2
Preauthentication:
Select
Enable
or
Disenable
.
–
Network Re-auth Interval:
Specify the timer of
re-authentication between the server and the client.
–
WPA Group Rekey Interval:
specifies the timer the
WPA key must change. If the value is set to 0, there
is no need to change. The change is done
automatically between the server and the client.
–
Radius Server IP Adress:
Enter the IP Address of
the authentication server.
–
Radius Port:
Enter the port number of the
authentication server. The default port number is
1812.
–
Radius Key:
Enter the same key as the Radius
server’s.
–
WPA Encryption:
Select
TKIP
,
AES
, or
TKIP + AES
.
AES
is default. The
TKIP + AES
encryption mode
means AP auto adjust to use TKIP or AES according
to wireless clients.
Click
Save/Apply
to save the wireless security options and
make the changes take effect.