60
4.4.1.3 PPPoE PVC IP Extension Mode
Description
In this example, the DSL Router is connected to the DSLAM
through PVC 8/35; the PPPoE is located between the WAN
interface of the DSL Router and BRAS. The encapsulation of
the downlink interface of BRAS is PPP over Ethernet, the
authentication is AUTO, the IP address is 10.28.106.200, the IP
pool is 10.28.106.*, and the IP address of the uplink interface is
10.61.92.157.
The WAN interface of the DSL Router obtains the IP address
that is dynamically assigned by BRAS through its built-in
PPPoE dial-up. The DSL Router assigns this public IP address
to the PC (configured as Obtain an IP address automatically)
attached to it in the DHCP mode. At this time, the NAT does not
take effect. From the aspect of the user, the DSL Router seems
works in the Bridging mode.
In some cases, this function is named zero installation PPP
bridge (ZIPB) mode.
Setting Procedure
Step 1
Open the Internet browser and enter
192.168.1.1
in the
address bar to log in to the DSL Router.
Step 2
Select
Advanced Setup
>
WAN
and click
Add
.
