166
Figure 137 Wireless-security (WPA authentication
)
WPA2 Authentication
–
Network Authentication:
Set the authentication
mode for the selected wireless LAN of SSID to
WPA2
.
–
WPA2
Preauthentication:
Select
Enable
or
Disenable.
–
Network Re-auth Interval:
Specify the timer of
re-authentication between the server and the client.
–
WPA Group Rekey Interval:
Specify the timer the
WPA key must change. If the value is set to 0, there
is no need to change. The change is done
automatically between the server and the client.
–
Radius Server IP Adress:
Enter the IP Address of
the authentication server.
–
Radius Port:
Enter the port number of the
authentication server. The default port number is
1812.
–
Radius Key:
Enter the same key as the Radius
server’s.
–
WPA Encryption:
Select TKIP, AES or TKIP + AES.
The AES is default. The TKIP + AES encryption
mode means AP auto adjust to use TKIP or AES
