191
Figure 155 SIP basic setting
SIP Basic Setting
page enables you to set some parameters,
such as
Preferred codec list
,
Preferred ptime
, and
SIP
domain name
. The following shows how to configure the
SIP
Basic Setting
page
step by step.
Interface name:
this item provides for you to choose the way
by which DSL router’s VoIP connect to SIP Proxy. There are
two ways: br0-Bridge and PPPoE. If you do not configure the
WAN
tab under the
Advanced Setup
menu, there is only
br0-Bridge you can choose. Default value is br0-Bridge. Please
consult your ISP for the method which you would like choose.
Locale selection:
this item is for you to choose country where
you locate. The different countries use different standards used
by DSL router VoIP module, such as ring tone standard. Local
selection default value is USA.
