68
Setting Procedure
Step 1
Open the Internet browser and enter 192.168.1.1 in the
address bar to log in to the DSL Router.
Step 2
Select
Advanced Setup
>
WAN
and click
Add
.
Step 3
In the
ATM PVC Configuration
page, set VPI/VCI to 1/35
and click
Next
.
Step 4
In the
Connection Type
page, select PPP over ATM
(PPPoA) and set the
Encapsulation Mode
to
VC MUX
,
and then click
Next
.
Step 5
In the
PPP User name and Password
page, enter the
user name and password provided by your ISP. Then,
click
Next
.
Step 6
In the
Enable IGMP Multicast and WAN Service
page,
keep the default settings and click
Next
.
Step 7
Confirm the network configuration and ensure that all
settings are consistent with the data provided by your
ISP. Then, click
Save
.
Step 8
Click
Save/Reboot
to apply the changes and reboot
the DSL Router.
4.4.1.6 Adding an MER PVC
This section describes the procedure for adding PVC 2/35
(MER mode).
Click
Add
and the following page appears.