59
Setting Procedure
Step 1
Open the Internet browser and enter
192.168.1.1
in the
address bar to log in to the DSL Router.
Step 2
Choose
Advanced Setup
>
WAN
and click
Add
.
Step 3
In the
ATM PVC Configuration
page, set VPI/VCI to 8/35
and click Next.
Step 4
In the
Connection Type
page, select
PPP over
Ethernet (PPPoE)
and set the
Encapsulation Mode
to
LLC/SNAP-BRIDGING
, and then click
Next
.
Step 5
In the
PPP User name and Password
page, enter the
user name and password provided by your ISP. Then,
click
Next
.
Step 6
In the
Enable IGMP Multicast and WAN Service
page,
keep the default settings and click
Next
.
Step 7
Confirm the network configuration and ensure that all
settings are consistent with the data provided by your
ISP. Then, click
Save
.
Step 8
Click
Save/Reboot
to apply the changes and reboot
the DSL Router.
You can also modify the PVC 8/35. To modify the LAN IP
address and DHCP server information, set in
LAN
in
Advanced Setup
.
After the dial-up is successful, the DSL Router obtains the IP
address at the WAN-side port
ppp_8_35_1
.
Choose
Device Info
>
Route
and the route table is as follows: