OSYPKA PACE 203H, Instructions For Use Manual

Page: 96 / 139

PACE 203H – Instructions for Use
96 / 139 5I-17-016X-B-20
PACE 203H
Warning Message
Meaning / Cause Measures to Eliminate the
Conflict / Error See
Chapter
Key
timeout
A key is pressed for more
than 120 seconds. There is
a possibility that something
heavy is pressing on PACE
203H, or it is being abutted
against an edge of some
sort. In case no cause is apparent,
and the error message per-
sists, this indicates that a key
is malfunctioning, and the
device must be sent to the
manufacturer for inspection
and service. ---
Atrial
lead
disconnected
or
Ventricular
lead
disconnected
The atrial lead or ventricu-
lar lead has been discon-
nected. The last stimulation
could not be properly car-
ried out.
Note:
This error message
will not be repeated after
confirmation, even if the
disconnection persists. The
open output is only indicat-
ed by the open lead symbol
(see Figure 12).
Note:
Surveillance can only
occur, if the stimulation
amplitude is set to a value
≥ 2.0 V, and if the pulse
duration is ≥ 0.15 millisec-
onds.
If the lead was not discon-
nected intentionally, there is a
possibility that lead breakage
or a disconnection of the
connector cable exists.
Check all connections, con-
nection cables and leads. 9.22.2
Atrial
output
short
or
Ventricular
output
short
The atrial or ventricular
output, respectively, is
short-circuited or low-
resistance bridged.
PACE 203H was unable to
deliver the last stimulation
pulse properly.
Note:
Surveillance can only
occur, if the stimulation
amplitude is set to a value
≥ 2.0 V, and if the pulse
duration is ≥ 0.15 millisec-
onds
Check all connections, con-
nection cables and leads, and
identify the short. 9.22.2
Table 67: Warning Messages Related to Application Errors