OSYPKA PACE 203H, Instructions For Use Manual

Page: 95 / 139

PACE 203H – Instructions for Use
5I-17-016X-B-20 95 / 139
9.22.9.2 Warning Messages Related
to Application Errors
Generally, if the problem is identified,
any application related errors can be
solved by the user. Application related
errors result in a warning message in the
lower display accompanied by an acous-
tic warning signal, which will be repeated
periodically. The warning message alerts
the user about the problem. It appears
after recognition of the error and disap-
pears after the problem has been solved,
or after confirmation by the user. The
user can confirm the error message by
pressing the key
Unlock/Lock
. Confir-
mation causes the warning message to
disappear, and the acoustic signal to
cease.
If an error is detected when the lower
display is switched off, the acoustic sig-
nal is then the only available warning. A
first press of the key
Unlock/Lock
swit-
ches the lower display and the backlight
on and unlocks PACE 203H. The warn-
ing message is now visible. A second
press of the key
Unlock/Lock
then con-
firms the error message.
If an error is detected when the lower
display is switched on, but the device is
locked, a first press of the key
Unlock /
Lock
switches the backlight on and
unlocks PACE 203H. A second press of
the key
Unlock/
then confirms the error
message.
The message (except the "... change
battery" and the "…lead disconnected"
messages) will reappear a few seconds
after confirmation, if the error persists.
Table 67 shows these messages.
PACE 203H
Warning Message
Meaning / Cause Measures to Eliminate the
Conflict / Error See
Chapter
Change battery! The battery change level is
reached.
Note:
This message will be
repeated after confirmation
every 10 minutes.
Insert a new battery. 9.22.1
11.2
Hurry up!
Change
battery!
The critical battery change
level is reached.
Note
:
This message will be
repeated after confirmation
every 2 minutes.
Insert a new battery. 9.22.1
11.2
Release
all keys
A key is pressed while
PACE 203H is turning on. Release all keys during the
power-on process of the
device to allow a proper self-
test. 9.3