OSYPKA PACE 203H, Instructions For Use Manual

Page: 26 / 139

PACE 203H – Instructions for Use
26 / 139 5I-17-016X-B-20
9.2 Overview of the Display,
Dials and Keys
9.2.1 Upper Parameter Display
The six parameters, basic rate, atrial
sensitivity, atrial pulse amplitude, A-V
Delay, ventricular pulse amplitude, ven-
tricular sensitivity, as well as the pacing
mode code (NBG code) and additional
symbols, are continuously displayed as
shown in Figure 3.
Figure 3 shows the upper parameter
display in DDD mode. Please refer to the
indicated paragraphs for detailed infor-
mation about the symbols.
Parameters are shown only when rele-
vant. In VVI mode, for instance, the
upper display will not show an atrial
stimulation amplitude, an atrial sensitivi-
ty, or an A-V Delay.
9.2.2 Lower Mode / Menu Display
The lower display is used to show selec-
tion menus (see section 9.2.5 “Softkeys
and Menus” on page 27) and various
messages. These messages can be
informative and alerting regarding errors
and conflicts
If the lower display is off, then pressing
the key
Lock/Unlock
turns the display
on.
After 2½…3 min, without any user op-
eration (turn of dials or pressing of keys),
the lower display disappears for battery
power saving.
Figure 3: Upper Display
see 9.13.6.1
see 9.13.6.2
see 9.7
see
9.22.3
see
9.22.2
see 9.13.6
see
9.10.1
see
9.22.5
see 9.10.2
and
9.10.3
see 9.4
see 9.22.1