OSYPKA PACE 203H, Instructions For Use Manual

Page: 27 / 139

PACE 203H – Instructions for Use
5I-17-016X-B-20 27 / 139
9.2.3 Dials
There are six dials corresponding to the
parameter segments in the upper pa-
rameter display. The six parameters
basic rate (& atrial overdrive rate), atrial
sensitivity, atrial pulse amplitude, A-V
Delay, ventricular pulse amplitude and
ventricular sensitivity are adjustable by
rotating these dials (see Table 2).
When the dials are rotated, there is both
a tactile (notched click) and acoustic
response (beep).
Dial Function
(HI-) RATE
Adjusting the basic rate
and the overdrive
stimulation rate.
A-SENSE
Adjusting the atrial
sensitivity.
A-STIM
Adjusting the atrial
pulse amplitude.
A-V DE-
LAY
Adjusting the A-V De-
lay.
V-STIM
Adjusting the ventricu-
lar pulse amplitude.
V-SENSE
Adjusting the ventricu-
lar sensitivity.
Table 2: Dials and their functions
9.2.4 Fixed Labeled Keys
Fixed labeled keys according to Table 3
are implemented.
Key Function
ON
Turning on the device.
OFF
Turning off the device.
Emergency
Setting emergency
stimulation parameters.
Lock/Unlock
Unlocking/Locking the
dials and the keys.
Pause
Disable stimulation
(as long as pressed)
Table 3: Fixed labeled keys and their
functions
9.2.5 Softkeys and Menus
For setting of the pacing mode and other
parameters and functions, five additional
keys, so called softkeys, are implement-
ed. These keys are used in conjunction
with, and are located next to the lower
display. Each softkey selects the option
that is displayed adjacent to it in different
menus shown in the lower display.
The Mode Menu (Table 4) appears first
when the lower display is turned on. The
mode selection is located in the top
menu level to allow a quick access.