OSYPKA PACE 203H, Instructions For Use Manual

Page: 110 / 139

PACE 203H – Instructions for Use
110 / 139 5I-17-016X-B-20
Parameter
Measurement conditions: Environment temperature: 20 ± 2°C
Voltage supply: 9 ± 0.5 V
Load resistance: 500
Ω ± 1%
Test impulse: as specified in
ISO 14702-8 (Triangle 2 ms / 13 ms)
Pacing modes: primary:
DDD, VVI, AAI, VDD
supplementary:
D00, V00, A00, DVI, DAI, VAT, AAT,
DDD+AT, DAT
Basic Rate: 30 … 220 ppm ± 2 %
Maximum tracking rate (MTR): 80 … 230 ppm ± 2 %
Atrial overdrive stimulation: 70 … 1000 ppm ± 5 %
Ventricular rapid pacing
(Firmware version 1.24 and up): 70 … 220 ppm ± 2 %
Output pulse: Cathodic, biphasic, asymmetric,
capacitive coupled, passive discharge
Nominal pulse amplitude (500
Ω
): 0.1…18 V ± 10 % ± 0.05V
Nominal pulse amplitude
(200
Ω … 2000 Ω ):
0.1…18 V ± 20 % ± 0.05V
Pulse duration: 0.05 ms ... 1.50 ms ± 10 % ± 0.01 ms
Atrial sensitivity:
0.2 … 20 mV ± 20 % ± 0.1 mV, ∞
Ventricular sensitivity:
1.0 … 20 mV ± 20 % ± 0.1 mV, ∞
Input impedance: 22 k Ω ± 20 %
Output impedance:
< 10 Ω
Load impedance range:
200 Ω …2000 Ω
A-V Delay (AVD): 5 ms ... 400 ms ± 5 % ± 2 ms
(minimum; 30 ms when atrial Auto Sense is
activated)
P-V delay (PVD): Determined by A-V Delay:
PVD = A-V Delay - 30 ms ± 5 % ± 2 ms