Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Page: 153 / 204

MOBILE WELDER OC PLUS ENGLISH
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
153
8.2 Weld mode
The "Weld Mode" softkey (1) is used to access the welding mode from the main menu:
1
Illustration: Main menu
The welding process can be started and all functions relevant to welding can be controlled in the weld-
ing menu/welding mode.
CAUTION General danger
► In case of danger, unplug the mains plug!
► Accessibility to the mains plug must always be assured in order to
permit disconnecting the power supply from the mains.
The "Welding procedure information field" (5) provides an overview of current technical values, such as
coolant and gas flows, welding voltage, temperatures.
The "Process graphic" (6) shows an overview of the current progress of the process and the current
welding position on the workpiece in the active welding process.
Welding parameters for the currently loaded welding process can also be adjusted at the administration
level ( see also the chapter User levels [ } 44] ).
In the welding mode, the "Start" softkey (2) is highlighted in red.