Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download

Page: 14 / 204

ENGLISH

MOBILE WELDER OC PLUS

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

• The operator must ensure that no 2nd person is located within the danger zone.

• Do not modify or convert the orbital welding power supply.

• Use the orbital welding power supply only in proper operating order.

• Before installing, remove any dirt from the feet of the power supply and the connecting elements.

• Before transporting, check the fastening screws between the power supply and the cooling unit for

secure fit; tighten if necessary.

• Use only genuine tools, spare parts and accessories as well as specified operating materials.

• In case of changes in the operating behavior, stop operation immediately and have the fault

eliminated.

• Do not remove safety devices.

• A residual current device (RCD) to IEC standards with a rated residual current of max. 0.03 A or a

protective isolating transformer is required on the mains side.

• Do not pull the machine by the hose assembly or the cable.

• Repair and maintenance work on the electrical equipment may only be carried out by a qualified

electrician.

• Do not carry the machine by the hose assembly or the cable. Do not pull the plug on the cable out

of the socket (except in an emergency). Protect the cable against heat, oil and sharp edges (chips).

• Do not transport the device by crane. Use handles, straps or holders for hand transport only.

2.6

Personal protective equipment

Always personal protective equipment (PPE) when welding. This protects the welder from exposure to
radiation, burns and welding fumes, among other things.

The following personal protective equipment must be worn when welding with the power supply:

►

Safety gloves 1/1/1/1 in accordance with EN 388 or 1/2/1/1 EN 407.

►

Safety gloves DIN 12477, Type A for welding operation and DIN 388, Class 4 for mounting the
electrode.

►

Safety shoes to EN ISO 20345, Class SB.

►

Eye protection to EN 170 and skin-covering safety clothing

►

Leather apron

►

Head covering for overhead work

►

When connecting and using a weld head observe the respective safety instructions and warning
messages of the weld head.

►

Observe the remaining risks.

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands