Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Page: 10 / 204

ENGLISH MOBILE WELDER OC PLUS
10
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
• Proper usage of all components involved in the welding processes as well as of all further factors
that have an influence on the welding process.
• Solely commercial usage.
2.2.2 Machine constraints
• The workplace can be in the tube preparation, in plant construction or in the plant itself.
• The device is operated by one person.
• The device may only be set up and operated on a stable, level and non-slip surface.
• A space of about 2 m for people to move around the unit must be provided.
• Work lighting: min. 300 Lux.
• Ambient conditions during operation:
Ambient temperature: –10 °C to +40 °C
Relative humidity: < 90% at +20 °C, < 50 % at +40 °C
• Ambient conditions during storage and transport:
Ambient temperature: –20 °C to +55 °C
Relative humidity: < 90% at +20 °C, < 50 % at +40 °C
• The device may only be installed and operated in a dry environment according to IP 23 (not in fog,
rain, thunderstorms, etc.). If appropriate, use a welding tent.
• Cooling is only ensured with a full coolant tank.
• Smoke, steam, oil vapors and grinding dust must be avoided.
• Avoid salty ambient air (sea air).
2.2.3 Welding in environments with increased electrical hazards
The power supply can be used in environments with increased electrical hazards.
It complies with the regulations and standards IEC/DIN EN 60974 and VDE0544.
2.2.4 Device cooling
Insufficient ventilation leads to reduced performance and equipment damage.
► Observe the limits of the machine.
► Keep inlet and outlet openings of the cooling air unobstructed.
► Keep a minimum distance of 0.5 m from obstacles.