Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download Page 62

Page: 62 / 204

ENGLISH

MOBILE WELDER OC PLUS

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

Operation

WARNING

Risk of electric shock from faulty or damaged insulation.

Normally protected parts of the power supply (e.g. housing) may be live.
If touched, death or severe injuries can result.

► Connect only to an electricity supply with a protective conductor PE.

CAUTION

General danger

► In case of danger, unplug the mains plug!

► Accessibility to the mains plug must always be assured in order to

permit disconnecting the power supply from the mains.

WARNING

Electric shock due to short circuit

► Set up only in a dry environment!

WARNING

Danger of burns and fire from arcs!

Tripping over the hose assembly can cause the welding current plugs to
be pulled out of the welding power supply and cause an arc.

► Lay the lines and cables so that they are

not

under tension.

► Ensure that lines and cables do not pose a trip hazard.

► Attach the strain relief.

► Mechanically secure hose assembly connection.

► Do not work near highly flammable substances.

WARNING

Danger of fire

► Follow general fire prevention measures!

► Do

not

work near flammable substances.

► Do

not

use flammable substances as a base in the welding area.

► Do

not

weld near solvents (for example where degreasing, painting

is being carried out) or explosive substances.

► Do

not

use flammable gases.

► Ensure that

flammable materials or soiling is located near the

machine.

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands