Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Page: 94 / 204

ENGLISH MOBILE WELDER OC PLUS
94
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
8.1.4.2.2 Basic adjustments
All basic adjustments required for the welding process can be made in the "Basic Adjustments" section
of the welding procedure.
2
3
4
5
6
7
8
1
Illustration: Basic adjustments, upper region of menu
NO. PARAMETER FUNCTION
1 "Process De-
tails"
See the chapter "Process Details" [
}
100]
2 "O.D.” Input field for the tube outer diameter to be welded in mm.
3 "Weld Head
Model" Possibility for selecting the torch type
If a welding torch is already connected, the connected torch model is deter-
mined automatically.
NOTICE! For automatic determination, the dropdown list must be acti-
vated once. The connected weld head model is highlighted and can be
selected.
4 "Weld Number" Consecutive numbering of welds.
Weld seam numbers can also be assigned individually.
They serve as an indicator of progress or as an identifier in documentation.
NOTICE! When the welding power supply is restarted or the program is
changed, the weld number is always reset to the value "1".
5 "Graphic Start
Position"
Enter in °. Rotates the process graphic of the software strictly visually to the
desired angle in degrees.
Serves as an orientation aid for the real start position of the electrode, or
for alignment of the weld head on the tube.