Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Page: 134 / 204

ENGLISH MOBILE WELDER OC PLUS
134
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
NO. TOUCHSCREEN
ELEMENT FUNCTION
1 "New" softkey New documentation fields can be created using the "New" softkey.
2 "Move" softkey The "Move" softkey can be used to change the display sequence of the doc-
umentation fields in the welding procedure and the log file.
3 "Delete" softkey The "Delete" softkey can be used to remove documentation fields.
4 "Rename" softkey The "Rename" softkey can be used to rename documentation fields.
5 "Title" text input
field Used to enter the name of the documentation parameter to be entered.
The designation is displayed as an input field designation in the welding pro-
cedure and under Documentation in the weld data log.
6 "Permanent"
checkbox When this option is activated, the parameter value entered in the welding
procedure is saved in the input field until the power supply is restarted.
This option is recommended for static parameters such as: "Welder ID",
"Weld head serial number", "Gas cylinder number", "Gas type", …
If the function is deactivated, the content of the input field is deleted after
each ignition and must be reentered.
This option is recommended for variable parameters such as: "Batch num-
ber", "Workpiece type", "Welding position in the geometry", …
NOTICE! You can select one, all or no checkboxes.
7 "Mandatory"
checkbox When this option is activated, a parameter must be specified in the associ-
ated documentation field to start a welding process.
NOTICE! You can select one, all or no checkboxes.
8.1.6.2.2.1 Creating a documentation field
To create a new documentation field please follow these steps:
From the main menu
1. Select the "Settings" menu item.
2. Select the "Program Settings" menu item.
3. Select the "Documentation" menu item.
4. Press the "New" softkey.
5. Enter the designation of the documentation parameter in the input field.
8.1.6.2.2.2 Moving a documentation field