Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download Page 127

Page: 127 / 204

MOBILE WELDER OC PLUS

ENGLISH

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

127

NO.

DESIGNATION

SYSTEM ADJUSTMENTS OPTIONS

"Continue In-

terrupted Pro-
gram"

When the function is activated, it is possible to continue the welding process
at the point where it was interrupted.

NOTICE! Aborting the welding process must be done manually via the

"Stop" key/button!

When the "Start" key/button is pressed again, the following message ap-
pears:

"Should the interrupted welding process be continued?"

The message can be confirmed with "Yes" or "No":

Yes

The welding process resumes with the "Gas Pre-
Purge Time" and "Rotor Start Delay" defined in
the welding procedure, then changes directly to
the level and angle position where the interruption
occurred, and continues the welding process from
there.

The welding process is aborted.

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands