Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download

Page: 27 / 204

MOBILE WELDER OC PLUS

ENGLISH

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

Transport and shipping

WARNING

Improper transport

Permanent damage to the welding power supply.

► Transport the power source only in a suitable, all-round protective

and shockproof outer packaging.

WARNING

Risk of injury from incorrect handling of shielding gas bottles

Incorrect handling and inadequate fastening of shielding gas bottles can
lead to serious injuries.

► Follow the instructions of the gas manufacturer and the legal regula-

tions for pressurized gas bottles.

► There must be nothing attached to the valve on the shielding gas

bottle.

► Avoid heating the shielding gas bottle.

CAUTION

Risk of tipping

When moving and setting up the device, it may tip over and be dam-
aged or injure people. Tipping resistance is guaranteed up to an angle
of 10° (to IEC 60974-1).

► Set up or transport the device on a level, solid surface.

► Use suitable means to secure the attachment parts.

CAUTION

Risk of accidents from falling and tripping hazards

During transport, supply lines that are not disconnected can cause haz-
ards, such as connected devices tipping over and causing injury to peo-
ple.

6.1

Gross weight

ITEM

WEIGHT*

UNIT

MOBILE WELDER, incl. scope of delivery*

19.0

41.88

lbs

ORBICOOL MW, incl. scope of delivery*

14.0

30.86

lbs

* incl. original ORBITALUM shipping cartons

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands