Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Page: 113 / 204

MOBILE WELDER OC PLUS ENGLISH
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
113
NO. PARAMETER PROCESS DETAIL/ITEM
3 "Start Current" process phase Welding ramp range in seconds during the "Start Current"
phase and the set parameter value.
4 "Upslope Time" process phase Welding ramp range in seconds during the "Upslope Time"
phase and the set parameter value.
5 "HP Current" process phase Welding ramp range in seconds during the "HP Current"
phase and the set parameter value.
6 "LP Current" process phase Welding ramp range in seconds during the "LP Current"
phase and the set parameter value.
7 "HP Time" process phase Welding ramp range in seconds during the "HP Time" phase
and the set parameter value.
8 "LP Time" process phase Welding ramp range in seconds during the "LP Time" phase
and the set parameter value.
9 "Downslope Time" process
phase Welding ramp range in seconds during the "Downslope
Time" phase and the set parameter value.
10 "Final Current" process phase Welding ramp range in seconds during the "Final Current"
phase and the set parameter value.
11 "Gas Post-Purge Time" process
phase Welding ramp range in seconds during the "Gas Pre-Purge
Time" phase and the set parameter value.
12 Mode icons The mode icons indicate the currently active welding mode.
Icon Mode
Constant welding
Pulsed welding