Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download

Page: 66 / 204

ENGLISH

MOBILE WELDER OC PLUS

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

NO.

DESIGNATION

FUNCTION

"Info" softkey

The "Info" softkey button can be used to display system messages.

New system messages are indicated by a blue circle on the left edge
of the softkey button. The number indicates the number of system
messages that have been generated.

Pressing the softkey button opens a window with a detailed, chrono-
logical listing of the system messages.

Pressing and holding the "Info" softkey button resets the warning
messages.

If there are no messages, the softkey button is grayed out and cannot
be pressed.

"Menu" softkey

Takes you directly to the main menu.

Welding procedure in-
formation

The "Welding Procedure Information" field displays information about
the currently loaded welding procedure.

Program name

Displays the file name of the loaded welding procedure.

Folder Name

Displays the name of the folder where the loaded welding procedure
is located.

Save status of welding
procedure "[not saved]".

The status "[not saved]" indicates that changes have been made in
the currently loaded welding procedure and these have not yet been
saved.

In the case of a newly created welding procedure, it indicates that the
welding procedure itself has not yet been saved.

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands