background image

MOBILE WELDER OC PLUS

ENGLISH

ORBITALUM TOOLS GmbH 

, D-78224 Singen www.orbitalum.com

35

1. Check the stability of the gas bottle.

2. Secure the gas bottle against falling over.

3. Attach the gas hoses included in the scope of

delivery to the pressure reducer.

4. Mount the pressure reducer on the gas bottle.

5. Set the desired volume rate on the pressure

reducer.

6. Insert the free end of the gas hose (1) into the

gas inlet connection (2) on the rear of the
power supply as far as it will go.

ð

The gas hose is secured against slipping out
by the locking ring of the gas inlet connection.

Gas hose diameter AD = 6 mm

1

2

7.7

Mains connection

For detailed information on the mains input voltage, see the chapter 

Technical specifications [

}

 25]

Ensure that the mains connection at the place of use complies with local regulations.

Ensure that only original ORBITALUM power supply cables are used for the mains connection.

Ensure that the electrical outlet is properly rated and grounded.

Check the power cable and power plug for damage before use.

WARNING

Faulty mains connection

Injury and property damage from electric shock

► Operate the welding power supply only on a single-phase 2-wire

system with grounded neutral conductor.

► A residual current device (RCD) to IEC standards with a rated resid-

ual current of max. 0.03 A or a protective isolating transformer is re-
quired on the mains side.

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Reviews: