Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Page: 130 / 204

ENGLISH MOBILE WELDER OC PLUS
130
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
8.1.6.2 Program settings
All program-related settings can be made in the program settings.
1
2
4
3
5
6
7
8
Illustration: "Program Settings" menu
NO. MENU ITEM SETTING OPTIONS
1 "Limit Adjust-
ments" In the "Limit Adjustments" menu item, you can define the limit values above
or below which a warning message or a welding process abort is triggered.
See also the chapter Limit Adjustments [ } 132]
2 "Print Limits" ON/
OFF The "Print Limits ON/OFF" slide button can be used to specify whether the
stored "Limit Adjustments" are to be appended to each weld data log.
"Print Limits" ON Attach "Limit Adjustments" activated.
"Print Limits" OFF "Limit Adjustments" attached not activated.
3 "Process Details"
See the chapter "Process Details" [ } 100]
4 "Prints Notes"
ON/OFF The "Print Notes ON/OFF" slide button can be used to specify whether the
information entered under "Process Details" is to be printed in addition to the
welding parameters when the welding procedure is printed out.
"Print Notes" ON Print "Process Details" activated
"Print Notes" OFF Print "Process Details" deactivated
5 Documentation Using the documentation function, you can define and display documentation
processes.
See also the chapter Overview and documentation list functions [ } 133] and
Documentation [ } 92]