manualshive.com logo in svg

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

The Orbitalum MOBILE WELDER OC PLUS provides precision welding capabilities in a portable package. To ensure optimal usage, a comprehensive Operating Instructions Manual is available for free download from our website. Unlock the full potential of this exceptional product by accessing the manual at manualshive.com.

Share
Download
background image

MOBILE WELDER OC PLUS

ENGLISH

ORBITALUM TOOLS GmbH 

, D-78224 Singen www.orbitalum.com

11

2.3

Environmental protection and disposal

2.3.1

Information regarding the Ecodesign Directive 2009/125/EG

MODEL

POWER INLET

MINIMUM EFFICIENCY
OF THE POWER SUPPLY

MAXIMUM POWER CON-
SUMPTION WHEN IDLE

Mobile Welder (OC/Plus)

1 x 110 - 230 V

1 phase + PE

81 %

31 W

(as per RL 2012/19/EU)

• Do not dispose of product (if applicable) with general waste.

• Reuse or recycle waste electrical and electronic equipment (WEEE)

by disposing of it at a designated collection point.

• Contact your local recycling office or dealer for more information.

Critical raw materials potentially present in indicative quantities
greater than 1 gram at the component level.

Critical raw materials potentially present in indicative quantities greater than 1 gram at the com-
ponent

COMPONENT

CRITICAL RAW MATERIAL

Printed circuit boards

Barite, bismuth, cobalt, gallium, germanium, hafnium, indium, heavy rare
earths, light rare earths,

Niobium, platinum group metals, scandium, silicon metal, tantalum, vana-
dium

Plastic components

Antimony, Barite

Electrical and electronic
components

Antimony, beryllium, magnesium

Metal components

Beryllium, cobalt, magnesium, tungsten, vanadium

Cable and cable assem-
blies

Borate, antimony, barite, beryllium, magnesium

Displays

Gallium, indium, heavy rare earths, light rare earths, niobium, platinum
group metals, scandium

Batteries

Fluorspar, heavy rare earths, light rare earths, magnesium

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Reviews:

No comments

Related manuals for MOBILE WELDER OC PLUS

Zenith Allegro Operating Manual & Warranty preview
Allegro
Brand: Zenith Pages: 24
Panasonic BL-WV10 Getting Started preview
BL-WV10
Brand: Panasonic Pages: 132
Panasonic WV-ASC970 Operation Manual preview
WV-ASC970
Brand: Panasonic Pages: 10
AARU ENGINEERS GD Series Operation Manual preview
GD Series
Brand: AARU ENGINEERS Pages: 4
Samsung HW-MS6500 User Manual preview
HW-MS6500
Brand: Samsung Pages: 77
Eaton i-on Compact User Manual preview
i-on Compact
Brand: Eaton Pages: 12
MagicRadar T04 Owner'S Manual preview
T04
Brand: MagicRadar Pages: 98
U-Prox Multiplexer User Manual preview
Multiplexer
Brand: U-Prox Pages: 3
Yardgard YG03 Installation & Operation Instructions preview
YG03
Brand: Yardgard Pages: 8
Fender Passport Conference 2 Series Owner'S Manual preview
Passport Conference 2 Series
Brand: Fender Pages: 20
Dakota Alert DCPAS-4000 User Manual preview
DCPAS-4000
Brand: Dakota Alert Pages: 18
JBL HTPS-400 Owner'S Manual preview
HTPS-400
Brand: JBL Pages: 8
Tokai LRD-3050W Instruction Manual preview
LRD-3050W
Brand: Tokai Pages: 20
BraunAbility Century 2 NCL10000 Series Service Manual preview
Century 2 NCL10000 Series
Brand: BraunAbility Pages: 39
Cooper Wheelock UTA-1 Specification preview
UTA-1
Brand: Cooper Wheelock Pages: 1
LINNEPE TriGas Manual preview
TriGas
Brand: LINNEPE Pages: 7
Q-See QC444-403 Quick Installation Manual preview
QC444-403
Brand: Q-See Pages: 10
Europlex SigNET 200 User Manual preview
SigNET 200
Brand: Europlex Pages: 15

Brands by name

Popular brands

Load more brands