Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Page: 158 / 204

ENGLISH MOBILE WELDER OC PLUS
158
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
NO. MENU ITEM FUNCTION
1 "Pre-Purge
Time" Time period in seconds for how long the weld torch is pressurized with the
process gas quantity from process start to ignition.
2 "Gas Quantity" Process gas quantity with which the weld head is pressurized during the weld-
ing process and the regular gas pre-purge time and post-purge time.
3 "Flow Force" -
Pre-Purge Function for activating the "Flow Force" function in the gas pre-purge phase.
Flow Force ON Flow Force active
Flow Force OFF Flow Force not active
4 "Flow Force
Time" Time period in seconds during which the weld head is pressurized with the set
"Flow Force Gas Quantity” in the gas pre-purge time
NOTICE! It is recommended that you reduce the welding gas quantity to
the actual process gas quantity at least 2 seconds before ignition of the
arc in order to allow the gas flow to stabilize before ignition.
5 "Flow Force
Gas Quantity" Welding gas quantity with which the weld head is pressurized during the "Flow
Force Time" in the pre-purge and post-purge phases.
6 "Post-Purge
Time" Time period in seconds for how long the welding torch is pressurized with
process gas quantity after the arc is extinguished.
7 "Flow Force" -
Post-Purge Function for activating the "Flow Force" function in the gas post-purge phase.
Flow Force ON Flow Force active
Flow Force OFF Flow Force not active
8 "Flow Force
Time" - Post-
Purge Time period in seconds during which the weld head is pressurized with the set
"Flow Force Gas Quantity” in the gas post-purge time.
NOTICE! It is recommended that you keep the process gas flow applied
for 3 seconds after the welding arc has been extinguished and then
switch to the Flow Force gas quantity.