manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 47

Understanding the Software Configurations

Channel cards, if those are installed in the card slots). The following graphic shows this concept

on a SuperCluster with four domains.

With dedicated domains, connections to the 10GbE client access network go through the

physical ports on each 10GbE NIC, and connections to the IB network go through the physical

ports on each IB HCA, as shown in the following graphic.

With dedicated domains, the domain configuration for a SuperCluster (the number of

domains and the SuperCluster-specific types assigned to each) are set at the time of the initial

installation, and can only be changed by an Oracle representative.

Understanding the System

47

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands