manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 30

Understanding the Hardware Components and Connections

Note - 

For the Half Rack version of Oracle SuperCluster T5-8, eight of the 16 PCIe slots

are occupied with either InfiniBand HCAs or 10-GbE NICs. However, all 16 PCIe slots are

accessible, so the remaining eight PCIe slots are available for optional Fibre Channel PCIe

cards. See 

“Using an Optional Fibre Channel PCIe Card” on page 139

 for more information.

FIGURE   5

Card Locations (Full Rack)

Figure Legend

1

Dual-port 10-GbE network interface cards, for connection to the 10-GbE client access network (see 

“10-GbE

Client Access Network Physical Connections (SPARC T5-8 Servers)” on page 35

)

2

Dual-port InfiniBand host channel adapters, for connection to the InfiniBand network (see 

“InfiniBand Private

Network Physical Connections (SPARC T5-8 Servers)” on page 32

)

30

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands