Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 170 / 356

Configuring CPU and Memory Resources (

osc-setcoremem

)

svcadm enable ssctuner

Verify that the

ssctuner

service started.

svcs ssctuner

If the service does not transition to an online state after a minute or two, check the service log

file. See

“View Log Files” on page 161

Check the

/var/adm/messages

log file to see if

ssctuner

changed any configuration

file settings.

See

“View Log Files” on page 161

If configuration settings changed, you must reboot the OS for the changes to take effect. If

settings did not change, you do not need to reboot the OS.

Related Information

■

“

ssctuner

Overview” on page 159

■

“Monitor

ssctuner

Activity” on page 160

■

“View Log Files” on page 161

■

“Configure the

EMAIL_ADDRESS

Property” on page 162

■

“Change

ssctuner

Properties and Disable Features” on page 163

■

Benchmarks” on page 165

■

“Monitor and View the Compliance Benchmark” on page 166

■

“Install

ssctuner

” on page 168

Configuring CPU and Memory Resources (

osc-setcoremem

)

This section describes how to configure Oracle SuperCluster CPU and memory resources using

osc-setcoremem

Prior to the Oracle SuperCluster July 2015 quarterly update, you configured CPU and memory

resources using the

setcoremem

tool (in some cases called

setcoremem-t4

setcoremem-t5

, or

setcoremem-m6

based on the SuperCluster model).

As of the Oracle SuperCluster July 2015 quarterly update, you use the

osc-setcoremem

tool,

and the previous commands are no longer available.

170

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands