Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 118 / 356

Oracle Safety Information

3. Wait 3 to 5 minutes for power-on self-test device

checks to finish and for all Oracle ILOM service

processors to boot.

4. Verify that server standby power is on for each

SPARC T5-8 server in Oracle SuperCluster T5-8.

5. Verify that the main power is on for each

database compute mode.

4. The ZFS storage controllers should start up

automatically.

If the storage controllers do not start up:

1. Press the soft switches located on the front of the

two ZFS storage controllers.

2. Wait 3 to 5 minutes for the ZFS storage appliance

to initiate NFS services, daemons, and basic

services.

3. Ping the IP address assigned to the ZFS storage

controllers to verify whether the system is up and

running.

5. Start the Exadata Storage Cells.

Wait for Oracle ILOM to boot, then either press the

Power On buttons, or turn on the Exadata Storage

Servers through Oracle ILOM.

6. Start the SPARC T5-8 servers.

1. Press the soft switches located on the front of the

SPARC T5-8 servers.

2. Verify that power is applied to the Ethernet

switch.

3. Verify that power is applied to the Sun

Datacenter Infiniband Switch 36 switches.

7. Configure Oracle SuperCluster T5-8.
8. Finish the installation.

(Optional) Install a PCIe card to copy a database

from another server.

“Using an Optional Fibre Channel PCIe

Card” on page 139

Oracle Safety Information

Become familiar with Oracle's safety information before installing any Oracle server or

equipment:

■

Read the safety notices printed on the product packaging.

■

Read the

Important Safety Information for Sun Hardware Systems

(821-1590) document

that is included with the rack.

118

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands