manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 119

Unpacking the System

■

Read all safety notices in the 

Sun Rack II Safety and Compliance Guide

 (820-4762) This

guide is available at 

http://docs.oracle.com/en

.

■

Read all safety notices in the 

Sun Rack II Power Distribution Units Users Guide

 (820-

4760). This guide is also available at 

http://docs.oracle.com/en

.

■

Read the safety labels that are on the equipment.

Unpacking the System

■

“Tools for Installation” on page 119

■

“Find the Unpacking Instructions” on page 119

■

“Unpack and Inspect the System” on page 121

Tools for Installation

The following additional tools are required for installation:

■

No. 2 Phillips screwdriver

■

Antistatic wrist strap

■

A tool to cut plastic strapping tape

Find the Unpacking Instructions

Locate the unpacking instructions.

The unpacking instructions are attached to the outside of the shipping package.

Figure 21, “Unpacking the Rack,” on page 120

 shows the major components of the shipping

package.

Installing the System

119

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands