manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 161

View Log Files

# 

svcs -l ssctuner

Related Information

■

“View Log Files” on page 161

■

“

ssctuner

 Overview” on page 159

■

“Configure the 

EMAIL_ADDRESS

 Property” on page 162

■

“Change 

ssctuner

 Properties and Disable Features” on page 163

■

“Configure 

ssctuner

 to Run 

compliance(1M)

 Benchmarks” on page 165

■

“Monitor and View the Compliance Benchmark” on page 166

■

“Install 

ssctuner

” on page 168

■

“Enable 

ssctuner

” on page 169

View Log Files

1.

View the 

ssctuner

 service log.

ssctuner

 writes messages to 

syslog

 and to the 

ssctuner

 service log. Those messages are

tagged as 

ssctuner

 and might point to other file locations for more information.

#

 svcs -x ssctuner

svc:/site/application/sysadmin/ssctuner:default (ssctuner for Oracle SuperCluster)
State: online since September 28, 2012 07:30:15 AM PDT
See: ssctuner(l)
See: /var/svc/log/site-application-sysadmin-ssctuner:default.log
Impact: None.
 
# 

more /var/svc/log/site-application-sysadmin-ssctuner\:default.log

[ Sep 28 07:30:00 Disabled. ]
[ Sep 28 07:30:00 Rereading configuration. ]
[ Sep 28 07:30:10 Enabled. ]
[ Sep 28 07:30:10 Executing start method ("/opt/oracle.supercluster/ssctuner.ksh start"). ]
ssctuner local0.notice success: Saved rollback for : /etc/system
ssctuner local0.notice success: Saved ndd rollback.
ssctuner local0.notice success: Saved rollback for : /kernel/drv/sd.conf
ssctuner local0.notice success: enabled, version 0.99e. daemon PID= 14599
[ Sep 28 07:30:15 Method "start" exited with status 0. ]
ssctuner local0.notice success: daemon executing
ssctuner local0.notice success: Changes made to /etc/system
ssctuner local0.notice success: Changes made to /kernel/drv/sd.conf

2.

View 

ssctuner

 messages in 

/var/adm

.

Maintaining the System

161

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands