manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 219

Approve and Verify ASR Asset Activation

Approve and Verify ASR Asset Activation

1.

On the standalone system where ASR Manager is running, run the following

command to verify the status of your system assets:

list_asset

This command should list ASR assets in your Oracle SuperCluster T5-8, including SPARC

T5-8 servers, Exadata Storage Servers, and ZFS storage controllers.

2.

Log in to My Oracle Support (

https://support.oracle.com

).

3.

In the My Oracle Support Dashboard, click the 

More...

 tab, then click 

Settings

from the menu.

4.

In the 

Settings

 pane on the left of the window, select 

Pending ASR Activations

(located under the Administrative sub menu).

A complete list of all qualified ASR assets that are awaiting approval are displayed.

Note - 

By default, all support identifiers that you are associated with are displayed. If this list of

assets is long, you can limit the display to show only assets associated to one support identifier.

You can also search for an asset's serial number.

Monitoring the System

219

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands