manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 298

Preparing for Installation

The Cisco Catalyst 4948 Ethernet switch supplied with the Oracle Exadata Storage Expansion

Rack is minimally configured during installation. The minimal configuration disables IP

routing, and sets the following:

■

Host name

■

IP address

■

Subnet mask

■

Default gateway

■

Domain name

■

Domain Name Server

■

NTP server

■

Time

■

Time zone

To deploy the Oracle Exadata Storage Expansion Rack, ensure that you meet the minimum

network requirements. There are two networks used for the Oracle Exadata Storage Expansion

Rack. Each network must be on a distinct and separate subnet from the others. The network

descriptions are as follows:

■

Management network

 – This required network connects to your existing management

network, and is used for administrative work for the Exadata Storage Servers. It connects

the servers, Oracle ILOM, and switches connected to the Ethernet switch in the rack. There

is one uplink from the Ethernet switch in the rack to your existing management network.

Note - 

Network connectivity to the PDUs is only required if the electric current will be

monitored remotely.

Each Exadata Storage Server use two network interfaces for management. One provides

management access to the operating system through the 1 GbE host management interface

(s), and the other provides access to the Oracle Integrated Lights Out Manager through the

Oracle ILOM Ethernet interface.

■

InfiniBand private network

 – This network connects the Exadata Storage Servers using

the InfiniBand switches on the rack. This non-routable network is fully contained in the

Oracle Exadata Storage Expansion Rack, and does not connect to your existing network.

This network is automatically configured during installation.

Note - 

All networks must be on distinct and separate subnets from each other.

Related Information

■

“Network Connection and IP Address Requirements” on page 299

298

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands