Oracle SuperCluster T5-8 Owner'S Manual Download Page 159

Page: 159 / 356

Drop an Exadata Storage Server

These topics describe the

ssctuner

utility:

■

“

ssctuner

Overview” on page 159

■

“Monitor

ssctuner

Activity” on page 160

■

“View Log Files” on page 161

■

“Configure the

EMAIL_ADDRESS

Property” on page 162

■

“Change

ssctuner

Properties and Disable Features” on page 163

■

Benchmarks” on page 165

■

“Monitor and View the Compliance Benchmark” on page 166

■

■

Related Information

■

For more information about ssctuner, refer to MOS note

1903388.1

at:

https://support.oracle.com

■

For more information about SMF services on the Oracle Solaris OS, see the

Oracle Solaris

System Administration Guide: Common System Management Tasks

at:

http://docs.oracle.com/cd/E23824_01/html/821-1451/hbrunlevels-25516.
html#scrolltoc

ssctuner

Overview

The

ssctuner

utility is a small set of Perl and Korn shell scripts and configuration files that run

on SuperCluster Oracle Solaris 10 and Oracle Solaris 11 global zones. By default,

ssctuner

installed and enabled at installation time.

The utility runs in realtime as an SMF service to monitor and tune ndd parameters and various

system configuration parameters including these files:

■

/etc/system

■

/kernel/drv/sd.conf

■

/kernel/drv/ssd.conf

■

/etc/inet/ntp.conf

The utility also periodically checks for the use of DISM or suboptimal NFS mount options.

By default, the utility runs every two hours and modifies parameters as needed.

Maintaining the System

159

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Brands by name

Popular brands