manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 172

Configuring CPU and Memory Resources (

osc-setcoremem

)

These points provide important information related to the use of 

osc-setcoremem

:

■

The final CPU and memory layout for a dedicated domain is optimized for locality to

minimize accesses to non-local resources.

■

The granularity of CPU and memory migration is 1 core and 16GB.

■

Empty dedicated domains (domains with zero cores and zero memory) are not supported.

■

The tool tracks resource allocation and ensures that the selections you make are valid. See

“Minimum and Maximum Resources (Dedicated Domains)” on page 173

.

■

Affected dedicated domains must be rebooted after any change.

The tool enables you to change the CPU and memory allocations in one of two levels of

granularity:

■

Socket granularity

 – The tool automatically allocates each domain a minimum of one

socket, then enables you to allocate remaining sockets to the domains. See 

“Change CPU/

Memory Allocations (Socket Granularity)” on page 182

.

■

Core granularity

 – The tool automatically allocates each domain a minimum number of

cores, then enables you to allocate additional cores in one-core increments. See 

“Change

CPU/Memory Allocations (Core Granularity)” on page 186

.

If you configure the CPU and memory resources so that some resources are not allocated

to any domain, those unallocated resources are parked. Parked resources are placed in a

logical CPU and memory repository and are available for I/O Domains. See 

“Park Cores and

Memory” on page 190

.

You can park resources from dedicated domains anytime, but you cannot move parked

resources to dedicated domains once I/O Domains are created.

Also see 

“Supported Domain Configurations” on page 174

.

Related Information

■

“Minimum and Maximum Resources (Dedicated Domains)” on page 173

■

“Supported Domain Configurations” on page 174

■

“Plan CPU and Memory Allocations” on page 175

■

“Display the Current Domain Configuration (

osc-setcoremem

)” on page 178

■

“Display the Current Domain Configuration (

ldm

)” on page 180

■

“Change CPU/Memory Allocations (Socket Granularity)” on page 182

■

“Change CPU/Memory Allocations (Core Granularity)” on page 186

■

“Park Cores and Memory” on page 190

172

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands