Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 27 / 356

Understanding the Hardware Components and Connections

■

“10-GbE Client Access Network Physical Connections (SPARC T5-8

Servers)” on page 35

PCIe Slots (SPARC T5-8 Servers)

Each Oracle SuperCluster T5-8 contains two SPARC T5-8 servers, regardless if it is a Full Rack

or a Half Rack. The distinguishing factor between a Full Rack or a Half Rack version of Oracle

SuperCluster T5-8 is not the number of SPARC T5-8 servers, but the number of processor

modules in each SPARC T5-8 server, where the Full Rack has four processor modules and the

Half Rack has two processor modules. See

“SPARC T5-8 Servers” on page 24

for more

information.

Each SPARC T5-8 server has sixteen PCIe slots:

■

Full Rack – All 16 PCIe slots are accessible, and all 16 PCIe slots are occupied with either

InfiniBand HCAs or 10-GbE NICs.

■

Half Rack – All 16 PCIe slots are accessible, but only eight of the 16 PCIe slots are

occupied with either InfiniBand HCAs or 10-GbE NICs. The remaining eight PCIe slots are

available for optional Fibre Channel PCIe cards.

The following figures show the topology for the Full Rack and Half Rack versions of Oracle

SuperCluster T5-8. Also see

“Card Locations (SPARC T5-8 Servers)” on page 29

for more

information.

Understanding the System

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands