manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 33

Understanding the Hardware Components and Connections

See 

“Card Locations (SPARC T5-8 Servers)” on page 29

 for more information on the

location of the InfiniBand HCAs.

The two ports in each InfiniBand HCA (ports 1 and 2) connect to a different leaf switch to

provide redundancy between the SPARC T5-8 servers and the leaf switches. The following

figures show how redundancy is achieved with the InfiniBand connections between the SPARC

T5-8 servers and the leaf switches in the Full Rack and Half Rack configurations.

FIGURE   8

InfiniBand Connections for SPARC T5-8 Servers, Full Rack

Understanding the System

33

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands